煤炭生产、消费与工业SO2排放关系计量研究——以西部8省为例

研究目的：探究工业SO₂排放与煤炭生产、消费存在必然的联系。研究方法：相关分析方法和改进的物理学重心模型。研究结果表明：(1)时序特征显示:西部煤炭生产、煤炭消费量和工业SO₂排放量整体都呈现上升趋势,三者增长率均呈现多波峰“M”状波动。2)重心轨迹显示:工业SO₂排放轨迹呈现为“倒L”型,煤炭生产和消费轨迹呈现为“J”型。(3)综合对比发现:煤炭生产从源头上影响工业SO₂排放,煤炭消费从空间上影响工业SO₂排放,为消减工业SO₂排放改善生态环境,必须在优先减少煤炭消费增加清洁能源比重的同时,更应该关注对煤炭生产过程的管控。     

Enhanced control strategies for a hybrid battery/photovoltaic system using FGS-PID in grid-connected mode

This paper suggests improved control strategies using Fuzzy Gain Scheduling of Proportional-Integral-Derivative (FGS-PID) controller for a hybrid Photovoltaic (PV) and Battery Energy Storage (BES) system under different weather conditions. The proposed scheme is implemented using a two-level control system structure, combining the benefits of the PID as well as the fuzzy logic controller (FLC) for maximum power point tracking (MPPT). Ziegler-Nichols tuning method is also employed to select the initial values of PID gains. Within the period of steady-states and transients, FGS-PID adopts the gains to ensure the stability of the control scheme. It also damps out transient fluctuations and reduces settling time. Also, BES could be employed to provide a stable and reliable power from the output of PV sources to loads. It can enhance the performance of the entire power system during the grid-connected mode. The simulation results under Matlab/Simulink show that the suggested control strategies are robustness, fast transient response and proper steady-state performance in the grid-connected mode in comparison other presented methods.     

基于时空的弱点状运动目标检测技术

如何在复杂背景下持续有效地检测目标位置,一直是研究者们需要面对的主要挑战。本文在研究红外点状移动目标特征的基础上,根据目标无纹理,无形状的特性,提出一种改进的形态学目标增强算法,并利用目标连续时空不变性检测目标。首先,建立多尺度的图像金字塔,在每层上采用改进的形态学算法快速、粗糙定位小目标。然后进一步的根据目标在时空上的位置相关性,提出基于目标运动特征分析的精确检测方法。得到精确稳定的检测结果。最后实验结果表明与经典的形态学检测算法及其他算法相比,该技术能更有效地检测弱小目标,具有更高的鲁棒性。     

一种使用多维度直方图匹配的图像风格迁移算法

在传统的基于直方图匹配的图像风格迁移算法的基础上，提出一种新的基于多维度直方图匹配的图像风格迁移算法。通过构建关于原图像的不同维度的直方图，然后进行原图像和目标图像的匹配，分别得到原图像在不同维度直方图下的风格迁移图像，最后对这些风格迁移后的图像进行融合生成最终的结果。在保持原图像与目标图像整体风格上尽量相似的情形下，同时又使原图像的局部细节尽可能保留，实现整体风格相似却又保留局部细节的平衡。     

SiO2颗粒增强酚醛树脂基摩擦材料力学性能研究

为探讨陶瓷颗粒对树脂基摩擦材料力学性能的影响,以SiO_2颗粒增强酚醛树脂基摩擦材料为例,利用三点弯曲实验研究颗粒特征对弯曲强度的影响,建立材料内部弹性应力场分布模型,并从细观力学角度进行分析。实验结果表明:添加二氧化硅陶瓷颗粒后,复合材料的弯曲强度降低、弹性模量升高;复合材料弯曲断裂截面显示脆性断裂特征,断裂过程中裂纹遇到颗粒贯穿通过;复合材料弯曲强度随颗粒含量增加而降低,随颗粒弹性模量增加先减小后增大。理论分析表明:陶瓷复合树脂基摩擦材料内部最大应力值位于颗粒边缘处;最大应力值随颗粒与基体弹性模量比值增大而增大;复合材料的平均应力与颗粒的含量成正相关。实验和理论研究表明,陶瓷颗粒添加引起材料内部应力集中,且与颗粒弹性模量和颗粒含量成正相关。     

Estimating underground mine ventilation friction factors from low density 3D data acquired by a moving LiDAR

Ventilation system analysis for underground mines has remained mostly unchanged since the Atkinson method was made popular by Mc Elroy in 1935. Data available to ventilation technicians and engineers is typically limited to the quantity of air moving through any given heading. Because computer-aided modelling, simulation, and ventilation system design tools have improved, it is now important to ensure that developed models have the most accurate information possible. This paper presents a new technique for estimating underground drift friction factors that works by processing 3 D point cloud data obtained by using a mobile Li DAR. Presented are field results that compare the proposed approach with previously published algorithms, as well as with manually acquired measurements.     

冷连轧机带钢切边宽度自动设定研究

宽展是冷连轧机切边剪切边宽度设定的重要考虑因素。影响宽展的因素较多,若考虑各影响因素,建立宽展模型十分困难。为此,在满足生产需求的前提下,通过大量数据分析,拟合出宽展系数计算多项式,进而可计算出满足需求的考虑宽展的切边剪宽度设定值,并通过自动化系统的改造实现了切边剪宽度的自动设定。     

A hybrid material-point spheropolygon-element method for solid and granular material interaction

Capturing the interaction between objects that have an extreme difference in Young's modulus or geometrical scale is a highly challenging topic for numerical simulation. One of the fundamental questions is how to build an accurate multiscale method with optimal computational efficiency. In this work, we develop a material-point-spheropolygon discrete element method (MPM-SDEM). Our approach fully couples the material point method (MPM) and the spheropolygon discrete element method (SDEM) through the exchange of contact force information. It combines the advantage of MPM for accurately simulating elastoplastic continuum materials and the high efficiency of DEM for calculating the Newtonian dynamics of discrete near-rigid objects. The MPM-SDEM framework is demonstrated with an explicit time integration scheme. Its accuracy and efficiency are further analyzed against the analytical and experimental data. Results demonstrate this method could accurately capture the contact force and momentum exchange between materials while maintaining favorable computational stability and efficiency. Our framework exhibits great potential in the analysis of multi-scale, multi-physics phenomena.     

基于高光谱图像的改进SIFT特征提取与匹配

针对尺度不变特征变换(SIFT)算法所提取图像特征点数量少、误匹率高的问题,提出了一种基于高光谱图像的改进SIFT算法。首先,依据传统SIFT算法中高斯金字塔的构造思想,结合在不同波段下的高光谱图像具有相同宏观特征的特点,首次用高光谱图像作为原始算法中经高斯变换产生的图像,使得检测到的具有实际意义的特征点数量大幅增加;其次,传统SIFT算法以及大量的改进方法都只通过目标象元邻域范围内的像素信息来构造特征描述符,而忽略了像素点的位置信息,文中将目标象元的位置信息纳入了特征描述符,在特征描述符的匹配阶段,在利用邻域范围内的像素信息进行粗匹配之后,利用特征描述符中的位置信息进行精细匹配。仿真实验结果表明在限定最优值与次优值之比的情况下,采用高光谱图像构造高斯金字塔的方式能显著增加特征点的提取数量,更多地挖掘出图像中的极值点;在特征描述符中加入目标象元的位置信息作为特征点匹配第二阶段的判断依据,正确匹配数量达到原方法的59倍以上,极大提升了算法的匹配性能。     

自动捕捉平衡系数试验电流工具设计

在电梯平衡系数传统测量方法中,存在电梯轿厢和对重平衡点难以判断、人为因素导致测量误差偏大、测量不准导致效率低等问题,为解决这些问题,设计出一款基于光电传感器和霍尔传感器的电流自动捕捉工具,除能够高效准确识别电梯轿厢和对重平衡点的位置外,还能通过无线信号传输处理,利用钳形电流表精确捕捉平衡点位置的电流值。经测试使用,该工具系统消除了在平衡系数测量过程中捕捉电流值的人为因素影响,并解决了无机房不能准确判断平衡点问题,有效的提高了检验工作的准确性和效率。